Dental Lab Curing Box for sale

Introduction

Preface

Dear valued customer, thank you for selecting this Led Light Curing Box. It is a high quality technical product for dental lab professionals. The Curing Box is developed for polymerization of dental composite and resin - harden impression tray, forming crown, bridge, artificial gingival and denture finishing etc. It is used in dental lab technology and equipped with state-of-the-art electronic components.

Inappropriate use may damage the Curing Box and be harmful to human body. Please read the relevant safety instruction. This will also help you use the Curing Box properly and easily.

Characteristic/feature

1. The Curing Box consists of dental blue LEDs which have much longer lifetime than halogen lamps.

2. Digital display control panel provides simple and user-friendly operation.

3. Widened Curing Chamber room makes the in-and-out of the curing object easier.

4. Rotating turntable in the Curing Chamber room. Inner surface of the chamber is surrounded by glossy stainless steel which reflects the LED light and makes performance uniform.

5. Buzzer upon curing process complete.

6. Safety interruption of curing process if door is opened.

Safety First

Indications

The Light Curing Box must only be used to cure light-curing composite and resin. Uses other than the one foresaid purpose are contraindicated. The manufacturer does not assume any liability for damage resulting from misuse.

Health and Safety Instructions

1. Direct view into the light without a filter or goggles may lead to eye harm.

2. Do not place the Curing Box in the immediate vicinity of heaters or other sources of heat.

3. Place the apparatus away from combustible objects.

4. Make sure that no foreign objects may enter the air vent.

5. The unit must be used indoors.

Note:

Working Environment

In order to ensure optimum performance, please keep the Curing Box in a clean environment. Dust might attach on the LED, causing malfunction of the LED or other damage.

Unpacking and checking the contents

1 Main Curing Box equipment

1 Power cord

1 Protective Goggle

1 User manual

Assembly and initial start-up

1. Make sure that the voltage indicated on the rating plate complies with local standard.

2. Selecting location: Place the Curing Box on a flat surface. Make sure it is not exposed to the immediate vicinity of heaters or other source of heat. Protect the Curing Box from direct sunlight.

Make sure the air may properly circulate between the wall and the unit.

3. Connect the power cord with the power socket.

Operation

Curing

The Curing Box supports 2 types of curing process: (1) Regular Continuous Mode and (2) Flashing Mode – 10 Hz on & off flashing. To activate the Regular Continuous Mode curing, press the On/Off button. To activate the Flashing Mode curing, hold down the On/Off button for more than 4 seconds until you hear a beeping sound. The UV Oven will then start the Flashing Mode curing process.

The maximum curing time per cycle can be set at 9min 50sec. When curing process starts, the digital timer counts down - indicating the remaining time of the process. In an emergency, stop the process by re-pressing On/Off button.

Safety switch

The system will be automatically suspended to protect operator when opening the door during curing. In case operator needs to calibrate light intensity, keep safety switch pressed to make system continue running and lighting.