Rolence Enterprise Inc.
| Payment Type: | T/T,Credit Card |
| Incoterm: | FOB,CFR,CIF,EXW,FAS,FCA,CPT,CIP,Express Delivery |
| Transportation: | Ocean,Air,Express |
| Port: | Port of Keelung |
Model No.: MS-1 Dual
Brand: ELiTEDENT
Place Of Origin: Taiwan, China
Kind Of Power: Electric
Warranty Service: 1 Year
After-sales Service: Online Technical Support, Onsite Training, Return And Replacement
Material: Metal, Plastic
Product Quality Certification: Ce
Medical Device Classification: Class Ii
Safety Standard: None
Size: 23 cm (H) x 22 cm (D) x 21.5 cm (W)
| Selling Units | : | Piece/Pieces |
| Package Type | : | Paper box |
| Download | : |
|
Contraindications and Warnings
Contraindications
1. Ultrasonic systems should not be used for restorative dental procedures involving the condensation of amalgam or porcelain.
2. This device is designed to work with all Cavitron® (remark) insert with 25 kHz or 30 kHz frequency automatically. For optimum performance please use only qualified inserts supplied by Cavitron® or Rolence Enterprise Inc.
3. Do not use this device if the patient or operator is wearing a pacemaker.
Remark: Cavitron® is a registered trademark of Dentsply® International, Inc.
Warnings
1. Persons who are fitted with cardiac pacemakers, defibrillators and other active implanted medical devices, have been cautioned that some types of electronic equipment might interfere with the operation of the device. We recommend that the MS Handpiece Cable kept at least 6 to 9 inches (15 to 23 cm) away from any device and their leads during use.
2. During using the Ultrasonic Scaler, make sure that water is flowing continuously. If the MS Sterilizable Sleeve of handpiece overheats please check the water supply, and stop using the Ultrasonic Scaler for a while.
Introduction
The Rolence ELiTEDENT® Ultrasonic Scaler is designed for use in prophylaxis treatments periodontia, and other areas of operative dentistry.
Rolence Enterprise Inc. is an ISO 9001, ISO 13485 certified manufacturer of Ultrasonic Scaler. The product is FDA registered and compliant with EN standards.
Conformance to Standards:
The ELiTEDENT® Ultrasonic Scaler conforms to IEC60601-1-2:2001 and IEC60601-1-1:2000.
The device is CE marked corresponding to European Medical Device Directive (93/42/EEC)
Safety Precautions
Prior to installation and start-up of the Ultrasonic Scaler, carefully read the instructions provided herein!
Precautions for All Systems
1. Do not place the Ultrasonic Scaler on or next to a radiator or other heat source. Excessive heat may damage the Ultrasonic Scaler’s electronics. Place the Ultrasonic Scaler where air is free to circulate on all sides and beneath it.
2. Never operate the Ultrasonic Scaler without water flowing through the handpiece.
3. Always flush your ELiTEDENT® Ultrasonic Scaler system with clean water at least 30 seconds at highest flow after treatment.
4. Do not continuously operate the Ultrasonic Scaler for more than 20 minutes; try 5 minutes down time before reserving.
5. Equipment maintenance is strongly recommended.
6. Close the power switch every night before leaving the office.
7. Used for the intended purpose only. The Ultrasonic Scaler must be used by other than qualified and trained personnel, in medical facilities.
8. Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle marked Hospital Only or Hospital Grade.
#Ultrasonic Scaler #Ultrasonic Scalers #Scaling Tip #Accessories
About Us
Related Products List
Contact Us
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now